FTW SDR - 2-Axis Rotary Tables with conventional drive

Our Two-Axis Rotary Tables combines the property of the Single Axis Rotary Tables with the advantage for 5 axis machining. The design of FTW SDR using all main components of the Single Axis Rotary Tables FTW DR.

The FTW SDR swivels with worm drive allow part positioning and simultaneous machining with high torque. The drive is equipped with an adjustable worm drive (Ott or Duplex). In special cases we additionally use a planetary gear.They allow an exact positioning even with high machining forces. The tables are equipped with an extremely stable, hydraulic clamping.

The FTW SDR rotary tables can be customized to a large degree and can be supplied in a broad range of variants..

  • Complex systems enable 5 axis machining of work pieces in one single clamping position
  • Drive by worm gear or bevel gear
  • Fluids are supplied by rotary coupling through the swivelling axis to the turning axis
  • Both devices of swivelling axis are possible to clamp in position
  • High acceptance of machining forces in case of strong casting housings and casting bridges
    • Worm gear made of bronze wheel and grinded steel worm shaft
    • Hydraulic clamping to take up high machine forces
    • Internal rotary coupling
    • Encoder based on indexing accuracy request up  to ± 1 arc sec.
    • Basis face plate with installed connection flange as support for swivelling bridge
    • Hydraulic work piece clamping available on request

    Technical Data:

    GRÖSSE /

    TYP

    SWIVELLING AXIS

    TURNING AXIS

    PARAMETER

    VALUE

    PARAMETER

    VALUE

    SDR 320

    nominal speed

    20 U/min

    nominal speed

    30 U/min

    turning moment

    1.900 Nm

    turning moment

    1.300 Nm

    tilting moment

    3.200 Nm

    max. tangential

    6.400 Nm

    (2 sides clamped)

    max. tangential

    2.500 Nm

    max. load

    400 kg

    SDR 400

    nominal speed

    18 U/min

    nominal speed

    25 U/min

    turning moment

    4.000 Nm

    (2 sides clamped)

    turning moment

    2.500 Nm

    tilting moment

    8.000 Nm

    max. tangential

    8.000 Nm

    max. tangential

    4.000 Nm

    max. load

    800 kg

    SDR 630

    nominal speed

    15 U/min

    nominal speed

    20 U/min

    turning moment

    7.500 Nm

    turning moment

    4.000 Nm

    tilting moment

    16.000 Nm

    max. tangential

    12.000 Nm

    (2 sides clamped)

    max. tangential

    8.000 Nm

    max. load

    1.400 kg